• Ph.D. in Mechanical Engineering – Shri Mata Vaishno Devi University, India (2018)
  Specialization: Self Lubricating Composites, Solid Lubricants, Coatings
• M.Tech. in Industrial Engineering- Punjab Technical University, India (2010)
  Specialization: Work Study, Ergonomics.
• B.E. in Mechanical Engineering – Karnataka University, India (1997)
  Specialization: Mechanical Engineering

• Associate Professor, Department of Mechanical Engineering, Shri Mata Vaishno Devi University, Jammu, India (20^th Sept 2024 – Present )
• Assistant Professor, Department of Mechanical Engineering, Shri Mata Vaishno Devi University, Jammu, India (20^th Sept 2011 – 20^th Sept.2024 )
• Lecturer, Department of Mechanical Engineering, Shri Mata Vaishno Devi University, Jammu, India (6^th August 2009 – 19^th Sept 2011 )
• Senior Lecturer, Department of Mechanical Engineering, Mahant Bachitter Singh College of Engineering & Technology, Jammu, India (2^nd June 2003 – 4^th Aug 2009 )
• Lecturer, Department of Mechanical Engineering, Government College of Engineering & Technology, Jammu, India (17^th Dec 1998 – 31^st May 2003 )
• Lecturer, Department of Mechanical Engineering, Regional College of Engineering, Srinagar, India,(Currently, NIT-Srinagar) (29^th Jan 1998 – 16^th Dec 1998 )

Engineering Mechanics: MEL1012  Lesson Plan

Human Machine Interface for Manufacturing MEL DE 614  Lesson Plan

• Coordinator & CEO, SMVDU-TBIC
• Coordinator Atal Innovation Community Centre (ACIC).
• Coordinator University Admission Committee
• Member of Course Curriculum Revision Committee
• Member of Transport Committee
• Member of National Project Evaluation Committee
• Member of University Purchase Committee
• Member of PG and Ph.D. Evaluation Committee
• Member of Board of Studies for parent and other organisations.

• Using industrial engineering techniques, industry-based projects were supervised to sort out industrial problems.
• Solutions were provided for problems related to the wear and friction of machine components by developing and characterizing self-lubricating composites/coatings.
• Projects was undertaken to address problems in industrial sectors that involved manual labor, and solutions were provided.
• Presented several papers in national and international conferences in India and abroad.
• Published articles in peer reviewed journals.
• Patent granted by Indian Patent Office, India

• Co-Coordinator in Project:Technology Innovation Hub at SMVDU, 20 lakhs (on going)
• Principal Investigator in Project: Ergonomic Apple Harvesting System,Sanctioned by PRISM-DST 2 lakhs (Completed).
• Member in the Project: “Training through Established Institutes”,Ministry of Human Resource Development (MHRD, India), 2010 (Completed)

1. Singh, K., Ul Haq, M. I., & Mohan, S. (2024). Synergism of h-BN and La2O3 in improving the tribological performance of Al2O3 coatings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501241272777.
2. De Stefano, M., Tech, M., Singh, K., Raina, A., Mohan, S., Ul Haq, M. I., & Ruggiero, A. (2024). Tribocorrosion of 3D Printed Dental Implants: An Overview. Journal of Taibah University Medical Sciences, 1-12. doi: 1016/j.jtumed.2024.05.004
3. Singh, K., Haq, M. I. U., & Mohan, S. (2024). Tribological Behavior of Novel Al₂O₃-La₂O₃ HVOF Composite Coatings. Tribology International, 109427. https://doi.org/10.1016/j.triboint.2024.109427
4. Mohan S, Anand A, Raina A, et al. High temperature tribological response of Fe-2Cu-0.8C-CaF₂ self-lubricating composites at high speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2024;0(0). doi:1177/13506501241233356
5. Haleem, A., Javaid, M., Khan, I. H., & Mohan, S. (2023). Significant Applications of Artificial Intelligence Towards Attaining Sustainability. Journal of Industrial Integration & Management, 8(4).
6. Srivyas, P. D., Gupta, A., Medhi, T., Arumugam, S., Kumar, D., & Mohan, S. (2023). Corrosion and Tribo-Investigations on Alumina–Graphene-Doped Hybrid Aluminium Composites. Transactions of the Indian Institute of Metals, 1-11. doi:1007/s12666-023-02999-x
7. Gupta, A., Pattnayak, A., Abhijith, N. V., Kumar, D., Chaudhry, V., & Mohan, S. (2023). Development of alumina-based hybrid composite coatings for high temperature erosive and corrosive environments. Ceramics International, 49(1), 862-874. https://doi.org/10.1016/j.ceramint.2022.09.059
8. Farooq, S. A., Raina, A., Haq, M. I. U., Rajabi, A., Mohan, S., & Anand, A. (2022). Tribo-corrosion behaviour of composites and coatings: An overview of influencing factors, evaluation methods and inhibitors. Jurnal Tribologi, 35, 92-116.
9. Javaid, M., Haleem, A., Khan, I. H., Singh, R. P., Suman, R., & Mohan, S. (2022). Significant features and applications of Drones for Healthcare: An overview. Journal of Industrial Integration and Management.
10. Zhao, S., Xin, D., Chen, X., Stasic, J., Trtica, M., Siddiquee, A. N., & Mohan, S. (2022). Microstructure and enhanced tensile properties of AlCoxCrFeNi high entropy alloys with high Co content fabricated by laser melting deposition. Journal of Alloys and Compounds, 165403. https://doi.org/10.1016/j.jallcom.2022.165403
11. Parshant Kumar, Vijay Kumar Srivastav, Deepak Kumar, Sanjay Mohan Sharma. Self and Complementary Mating Of Carbon-Carbon and Carbon-Carbon-Silicon Carbide Composites in Reciprocating Tribo-Interactions, Tribology in Industry (online, May 2022)
12. Sheikh Aamir Farooq, Ankush Raina, Mir Irfan Ul Haq, Sanjay Mohan, R Arvind Singh, S Jayalakshmi. Nanostructured Coatings: Review on Processing Techniques, Corosion Behaviour and Tribological Performance. Nanomaterials, 2022, 12(8), 1323.
13. Sheikh Aamir Farooq, Ankush Anand, Ankush Raina and Mir Irfan Ul Haq, Sanjay Mohan. Tribocorrosion Behaviour of Composites and Coatings: An Overview of Influencing Factors, Evaluation and Methods and Inhibtors. Jurnal Tribologi (Accepted, 2022)
14. Javaid, M., Haleem, A., Rab, S., Singh, R.P., Suman, R.and Mohan, S. (2022), “Progressive schema of 5G for Industry 4.0: features, enablers, and services”, Industrial Robot, 49/3 (2022) 527–543.
15. Sharma, A., Mehtab, R., Mohan, S., & Shah, M. K. M. (2021). Augmented reality–an important aspect of Industry 4.0. Industrial Robot: 49/3 (2022) 428–441
16. Gagandeep Singh, Hartaj Singh, Kapil Singh, Sachit Vardhan, Sanjay Mohan, (2021). Mechanical characterization of the fractured AA 6061 based composites reinforced with B₄C particulates. Materials Today Proceedings,  60(2),1086-1089.
17. Singh, H. Singh K., Vardhan, S.,Mohan, S. (2022). A comprehensive review on the new developments consideration in a stir casting processing of Aluminium Matrix Composites. Materials Today Proceedings, 60(2), 974-981
18. Kapil Singh, Hartaj Singh, Sachit Vardhan, Sanjay Mohan, (2021). An overview on the synthesis of aluminium matrix composites using stir casting technique. Materials Today Proceedings, vol.60(2), 868-872.
19. Kumar, R., Ul Haq, M. I., Sharma, S. M., Raina, A., & Anand, A. (2021). Effect of water absorption on mechanical and tribological properties of Indian ramie/epoxy composites. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501211005635.
20. Raina, A., Irfan Ul Haq, M., Anand, A., Mohan, S., Kumar, R., Jayalakshmi, S., & Arvind Singh, R. (2021). Nanodiamond Particles as Secondary Additive for Polyalphaolefin Oil Lubrication of Steel–Aluminium Contact. Nanomaterials, 11(6), 1438
21. S Jayalakshmi, R Arvind Singh*, Sanjay Mohan, S Sankaranarayanan, Vasco Machembo Gomano, Xizhang Chen & Manoj Gupta. Microstructure and Mechanical Properties of Magnesium-Aluminium (Mg-Al) Alloys with High Aluminium Content (Al =10, 15, 20 wt. %), Indian Journal of Pure and Applied Physics 59, pp. 184-189, March 2021.
22. Mohd Kamal Mohd Shah, Sanjay Mohan*, Irma Othman, M Zakrymizam Yusuf & Alexander C. Investigation of Tensile properties of Bambusa Vulgaris Reinforced Unsaturated Polyester Resin. Indian Journal of Pure and Applied Physics, vol. 59, , pp. 190-196, March 2021.
23. Mir Irfan Ul Haq , Ankush Raina , Sanjay Mohan Sharma*, Ankush Ananda & Mohd Fadzli Bin Abdollah, Potential of AA7075 as a Tribological Material for Industrial Applications -A Review, Indian Journal of Pure and Applied Physics, 59, pp. 197-201, March 2021.
24. Singh H*. Singh, K., Vardhan, S., Mohan, S., & Singh, V. A. (2021).  A Comprehensive review of aluminum matrix composites reinforcement and fabrication methodologies,Functional Composites and Structures. vol. 3, 015007.
25. Singh, K., Singh, H., Vardhan, S., & Mohan, S. (2021). Mechanical study of Al 7050 and Al 7075 based metal matrix composites: A review. Materials Today: Proceedings. vol.43(1), 673-677
26. Hartaj Singh, Kapil Singh*, Sachit Vardhan, Sanjay Mohan (2021). Study on the wear performance of AA 6061 and AA 6082 based metal matrix composites, Materials Today Proceedings, 43(1), 660-664
27. Subramanian, J., Ramachandra, A. S., Raina, A., Ul Haq, M. I., Sharma, S. M., & Chen, X. (2021). Polymeric nanostructures for prospective tribological application in miniaturized devices: a review. Current Nanomaterials, 6(2), 85-89.
28. Sanjay Mohan*, Ankush Anand , Mir Irfan Ul Haq , Ankush Raina , Rajiv Kumar & Mohd Kamal (2020). Development of a NIOSH based software tool for musculoskeletal disorders. Indian Journal of Engineering & Materials Sciences, 27, 860-865.
29. Subramanian Jayalakshmi, Ramachandra Arvind Singh, Sanjay Mohan*, Xizhang Chen & Manoj Gupta (2020).Mechanical and tribological properties of aluminium incorporated with amorphous Ni60Nb40 particles. Indian Journal of Engineering & Materials Sciences, 27, 844-852.
30. Haq, M. I. U*., Raina, A., Anand, A., Sharma, S. M., & Kumar, R. (2020). Elucidating the Effect of MoS₂ on the Mechanical and Tribological Behavior of AA7075/Si₃ N₄Journal of Materials Engineering and Performance, 29(11), 7445-7455.
31. Shah, M. K. M., Beng, Y. K., Mohan, S*., Husen, M. N., Othman, I., & Tan, Y. P. (2020). Experimental and numerical study of the crushing behavior of pultruded composite tube structure. Journal of Polymer Engineering,40(7), 615-627.
32. Gupta, Avi, Sanjay Mohan*, Ankush Anand, Mir Irfan Ul Haq, Ankush Raina, Rajiv Kumar, R. Arvind Singh, S. Jayalakshmi, and Mohd Kamal. “Tribological behaviour of Fe–C–Ni self-lubricating composites with WS2 solid lubricant.” Materials Research Express 6, no. 12 (2019): 126507.
33. Katoch, V., & Mohan, S*. (2019). Design and fabrication of a safety frame for workers carrying out head lifting at construction sites. Journal of Engineering, Design and Technology, 17, pp.1250-65. https://doi.org/10.1108/JEDT-02-2019-0037
34. Sharma, S. M*., & Anand, A. (2018). Effect of Speed on the Tribological Behavior of Fe–Cu–C Based Self Lubricating Composite. Transactions of the Indian Institute of Metals, 71(4), 883-891. https://doi.org/10.1007/s12666-017-1228-1
35. Sharma, S.M*. and Anand, A., (2017), Friction and wear behaviour of Fe-Cu-C based self lubricating material with CaF2 as solid lubricant. Industrial Lubrication and Tribology, 69(5), pp.715-722. https://doi.org/10.1108/ILT-04-2016-0085
36. Anand, A., & Sharma, S. M*. (2017). High Temperature Friction and Wear Characteristics of Fe–Cu–C Based Self-Lubricating Material. Transactions of the Indian Institute of Metals, 70(10), 2641-2650. org/10.1007/s12666-017-1124-8
37. Anand, A., Haq, M. I. U., Raina, A., Vohra, K., Kumar, R., & Sharma, S. M. (2017). Natural Systems and Tribology-Analogies and Lessons. Materials Today: Proceedings, 4(4), 5228-5232.
38. Singh, N., Mir, I. U. H., Raina, A., Anand, A., Kumar, V., & Sharma, S. M. (2017). Synthesis and tribological investigation of Al-SiC based nano hybrid composite. Alexandria Engineering Journal, vol.57(3), 1323-1330.
39. Sharma, S. M*., & Anand, A. (2016). Solid Lubrication in Iron Based Materials–A Review. Tribology in Industry, 38(3).
40. Sharma, S. M*., Singh, S., Singh, B., Javaid, M., & Asjad, M. (2016). Some investigations on low back pain amongst workers involved in lifting tasks. International Journal of Procurement Management, 9(6), 659-683.

• “A Novel Approach to Deep Learning in Medical Image Analysis”
  Proceedings of the International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI), 2023.

• “Reinforcement Learning for Real-Time Autonomous Vehicle Control”
  Proceedings of the IEEE Intelligent Vehicles Symposium (IV), 2016.

Book Published

1. Sanjay Mohan, Engineering Mechanics, Kirti Publishers (India) 2019, ISBN: 9789389411010.
2. Kamal ,Nahiyan Al Azad, Sanjay Mohan, Advancements in Natural Fibre Composites for Industrial Applications, Global Academic Excellence (M), SDN BHD, Malaysia EISBN:978-967-2426-46-2

Book Chapters

1. Singh, K., Mohan, S., Konovalov, S., & Graf, M. (2023). Effect of nano-hydroxyapatite and post heat treatment on biomedical implants by sol-gel and HVOF spraying. In Nanomaterials for Sustainable Tribology (pp. 257-285). CRC Press.
2. Mohan, S., Anand, A., Kumar, R., Kamal, M. (2022). The Role of Postural Assessment Techniques in Different workplaces—A Review. In: Chakrabarti, D., Karmakar, S., Salve, U.R. (eds) Ergonomics for Design and Innovation. HWWE 2021. Lecture Notes in Networks and Systems, vol 391. Springer, Cham. https://doi.org/10.1007/978-3-030-94277-9_149
3. Wani, S. N., Mohan, S., & Kamal, M. (2022). Engineering and Ergonomics—An Important Aspect in Fruit Harvesting Systems. In Advances in Mechanical and Materials Technology (pp. 1453-1461). Springer, Singapore.
4. Sharma, S., Mahajan, P., & Mohan, S. (2022). Study of High-Velocity Oxy-fuel Coating Technique and Fe-Based High-Velocity Oxy-fuel Coatings. In Advances in Mechanical and Materials Technology (pp. 649-661). Springer, Singapore
5. Gurpreet Singh Bali, S., Singh, G., Singh, B., & Mohan, S. (2022). Improvement in Overall Equipment Effectiveness in Manufacturing Industry Using Autonomous Maintenance. In Advances in Mechanical and Materials Technology (pp. 455-468). Springer, Singapore.
6. Kumar, R., Haq, M. I. U., Raina, A., Sharma, S. M., Anand, A., & Abdollah, M. F. B. (2021). Tribological Behaviour of Natural Fibre Based Polymer Composites. In Tribology of Polymer and Polymer Composites for Industry 4.0 (pp. 55-69). Springer, Singapore
7. Raina, A., Haq, M. I. U., Mohan, S., Anand, A., & Graf, M. (2021). Materials for Tribological Applications: An Overview. Tribology and Sustainability, 3-22.
8. Mir Irfan Ul Haq, Jayalakshmi, R. Arvind Singh, Sanjay Mohan, Ankush Raina, Xizhang Chen, Sergey Konovalov and Manoj Gupta Mechanical and Tribological Properties of Aluminium Based Metal Matrix Nanocomposites Book: Encyclopaedia of Materials: Composites, By Elsevier (Accepted, 2021).
9. Jayalakshmi, R. Arvind Singh, Sanjay Mohan, Sankaranarayanan Seetharaman, Xizhang Chen, S.V. Konovalov, and M. Gupta, ‘Mechanical Properties and Tribological Behaviour of Magnesium Metal Matrix Composites with Nano-Sized Reinforcements’, Section 1: Light Alloys and Metal Matrix Composites, Encyclopaedia of Materials: Metals and Alloys, Reference Module in Materials Science and Materials Engineering, Elsevier Publication (January 2020) DOI: 10.1016/B978-0-12-819726-4.00045-4.
10. Mohan, S*., Anand, A., Haq, M. I. U., Raina, A., & Kumar, R. (2020). Calcium Fluoride a Potential Solid Lubricant for Green Tribology and Sustainability. In Recent Advances in Mechanical Engineering (pp. 587-595). Springer, Singapore.
11. Slathia, S., Anand, R., Haq, M. I. U., Raina, A., Mohan, S., Kumar, R., & Anand, A. (2020). Friction and Wear Behaviour of AA2024/ZrO₂ Composites: Effect of Graphite. In Recent Advances in Mechanical Engineering, pp. 597-601. Springer, Singapore.

• Ph.D. Students Supervised – Shri Mata Vaishno devi University, India (2018–Present)

  • Supervised 02 Ph.D. candidates in the regime of Self Lubricating Composites using Rare Earth Oxides.
  • 02 candidates pursuing Ph.D.

• Master’s Thesis Advisor – Shri Mata Vaishno devi University, India (2010–present)

  • Mentored more than 10 Master’s students in Mechanical Engineering, Manufacturing and Automation.

Sanjay Mohan and Nikhil Kumar, Title: “Multitasking Mop Handle”

Patent No. 508337

Patent granted by Indian Patent Office, Govt. of India.

1. Coordinated one day workshop on 3D Printing for Entrepreneurs on 1^st March 2024 at Shri Mata Vaishno Devi University, Katra, India
2. Coordinated one day workshop on Curriculum Planning and Course Design on 21^st 2024 at Shri Mata Vaishno Devi University, Katra, India
3. Coordinated one week workshop on 3D printing and new product development 5-9^th 2024 at Shri Mata Vaishno Devi University, Katra, India
4. Coordinated Quiz Completion on Brainiac Challenge: A General Knowledge Quiz for Students”,12^th December, 2023.
5. Coordinated one day Seminar on “Smart Materials: Current Scenario and Future Prospects” 6^th June, 2023 at Shri Mata Vaishno Devi University, Katra, India
6. Coordinated one day Workshop on Current Industrial Scenario: Opportunities and Challenges,15 March, 2023 at Shri Mata Vaishno Devi University, Katra, India
7. Organised National Engineers Day at Shri Mata Vaishno Devi University, Katra, India
8. Organised webinar, on Social Initiatives for Financial Awareness, 17^th Dec 2021.
9. Organizing Secretary, International Tribology Research Symposium, Shri Mata Vaishno Devi University Nov 2020, India.
10. Coordinator, Short term course on Engineering Optimization from 21-25^th October, 2019, Shri Mata Vaishno Devi University, India.
11. Coordinator, National Workshop on 3D Printing for New Product Development, 13^th September, 2019, Shri Mata Vaishno Devi University, India.
12. Member of Organizing Committee, Indo-US Workshop and CEO Conference, 5-10^th August 2019, Shri Mata Vaishno Devi University, Katra, India.
13. Coordinator, 3^rd Industry Academia Conclave on “Bridging gap between Industry & Academia”, 8-9^th January, 2019, Shri Mata Vaishno Devi University, Katra, India.
14. Organizing Secretary, Faculty Development Programme on “Best Manufacturing Practices in Industries”, 17^th – 21^st December, 2018, Shri Mata Vaishno Devi University, Katra, India.
15. Organised Expert Lecture of Sr. Manager, VE Commercial Vehicles, 14^th Dec 2018.
16. Convenor, International Conference on Mechanical Engineering and Allied Sciences, Shri Mata Vaishno Devi University, India. 14-15^th September, 2018.
17. Member of Organizing Committee, 2^nd National Conference on Innovative Trends in Mechanical Engineering (NCITME-2018), Shri Mata Vaishno Devi University, 23-24^th March, 2018.
18. Member of Organizing Committee, Faculty Development Program on Sustainable Design and Manufacturing, Shri Mata Vaishno Devi University, 12-16^th February, 2018.
19. Member of Organizing Committee, National Seminar on Mechanical Engineering- Research Opportunities and Challenges, Shri Mata Vaishno Devi University, Katra, India. 8^th April, 2017.
20. Member of Organizing Committee, National Conference on Innovative Trends in Mechanical Engineering, 3-4^th March, 2017, Shri Mata Vaishno Devi University, Katra, India.(Co-Convener).
21. Coordinator, 2 weeks Workshop on Engineering Mechanics sponsored by IIT Bombay, 26-06^th Dec 2013, India.

• Expert lecture on “Tribology and manufacturing“, One week Short Term Programme on Sustainable Product Design and Manufacturing, 23^rd  July, 2024
• Invited Talk on “Lean and Green Manufacturing”, Faculty Development Program on Green Manufacturing, Shri Mata Vaishno Devi University, 7^th2024
• Expert Lecture on “Fundamentals of Product development”, Technology Innovation Hub, Shri Mata Vaishno Devi University, 6^th March, 2024
• Invited talk on “The Role/Scope of Mechanical Engineering”, KC Public School, Jammu, 10^th November, 2023.
• Expert lecture on Exploring the Critical Implications of Night Driving and Drowsiness, Shri Mata Vaishno Devi University, 22th September, 2023
• Invited Expert in a Workshop on Course Curriculum development of Mechanical and Automobile Engineering, Govt.Polytechnic, Vikram Chowk, Jammu, 9^th May, 2023.
• “Ergonomics for Engineers”, Invited Talk at Govt,Polytechnic College, Reasi, India 11^th Feb, 2023.
• “Novel Fe-Cu-C based Self Lubricating Composites” Global Webinar on Materials Science and Engineering, 29-30 August, 2022.
• “Wear and Friction of Iron based Self Lubricating Composites” Universidad Tecnica del Norte, 25^th October, 2021
• “Iron based Self Lubricating Composites: Green and Sustainable Materials”,Shri Mata Vaishno Devi University,Katra, India, 25^th May, 2021

• “Tribology and Manufacturing”,Universiti Malaysia Sabah, Sabah, Malayisa, 29^th Dec. 2020

• “The role of tribology in Manufacturing Technology”,Beyant College of Engineering and Technology, Gurdaspur, Punjab, India. 29^th October.2020

• “Iron based Self Lubricating Composites”,One week STC, Shri Mata Vaishno Devi University, Katra, 20-24^th July 2020

• “Applications of Engineering Mechanics”,Model Institute of Engineering and Technology, Jammu, India, 25 Sept. 2019.

• “Industrial Engineering and Management”,Mahant Bachitter Singh College of Engineering & Technology, Jammu, India, 8^th May, 2019.

• “Engineering Mechanics”,Government Polytechnic, Doda, Jammu, India,  4^th  May, 2019.

• “Role of Ergonomics in today’s life”,S.Sukhjinder Singh College of Engineering and Technology, Gurdaspur, Punjab, India. 27^th April, 2019

• Expert Lecture on “Design and Ergonomics”,Yogananda College of Engineering & technology, Jammu, India, 2^nd Feb.2018

• “Inventory Management Empirical Analysis”,EDP, Shri Mata Vaishno Devi University, 23^rd Dec 2017.

• “Laser and its applications in New Era”,Government Polytechnic, Jammu, India, 22^nd Dec 2016.

• “Engineering Mechanics and its Applications”,Government Polytechnic, Jammu, India, 15^th Nov 2014.

• Visited China  to attend a Workshop 
• Visited Malaysia to attend a Conference

Awards

• Best Paper Award in International Conference on Advances in Mechanical Engineering, Organized by University Technology Mara, 14-16 August, 2019, Kota Kinabalu, Malaysia.

• Best Presenter Award in      International Conference on Advances in Mechanical Engineering, Organized by University Technology Mara, 14-16 August, 2019, Kota Kinabalu, Malaysia.

• Best Paper Award in National Conference on Advances in Mechanical Engineering, National Institute of Technology, 16 March, 2019, Delhi, India